Waterproof Work Boots Size:46 black

These pvc boots are suitable for environments like agriculture, logistics, construction, and even mechanics, providing protection against specific hazards. They must be chosen according to the hazards present in the workplace.

General information :

Steel Toecap Protection

Stainless steel toe cap can reach 200 joules from falling or rolling objects. It is stronger than iron toe cap.

Steel Midsole Plate Protection

Steel midsole plate, is zero-penetration resistant. It can resist 1100 newtons nail puncture from sharp objects. It is stronger and more flexible than normal iron plate.

Water Resistant

PVC High quality PVC material is water resistant performance. The upper is soft and comfortable, with breathable fabric lining. The upper tear strength is more than 60 newtons, to resist hard-work wearing.

Heavy Duty PVC Outsole

The outsole is made with PVC material, plus 5-10% nitrile. The outsole can pass both SRA & SRB test for slip resistant. High density PVC outsole is designed as EN ISO 20347 standard for abrasion resistant.

Technical Details :

1. Upper, Lining & Bonding Strength Test Result

Leather Tear Strength ≥          120.0 Newtons

Leather Tensile Properties ≥   15.0 N/mm²

Lining Tear Strength ≥             15.0 N/mm

Bonding Strength ≥ 4.0 N/mm

2. Protection with Steel Toecap (200 Joules)

Impact Resistance: Impact Energy: 200 ± 4 Joules, Internal Height Clearence ≥ 14mm

Compression Resistance: Compression Force: (15 ± 0.1) KN, Internal Height Clearence ≥ 14mm

3. Penetration Resistance (1100 N)

Penetration Resistance Force ≥ 1100 N

4. Protection With Slip Resistant (SRC)

Test Requirement: SRA (Eurotile 2+Nal S) Forward Heel Slip ≥0.28 & Forward Flat Slip: ≥0.32

SRB (Steel Floor+Glycerine) Forward Heel Slip ≥0.13 & Forward Flat Slip: ≥0.18

Standards: EN ISO20344:2011(5.11), SRC Means both SRA & SRB requirements are fulfilled.

5. Protection With Anti-Static

Test Requirement: Anti-static 100KΩ-1000MΩ， Test Voltage: 100±2 V DC， Test Period: 1 Minute

Standards: ENISO 20344:2011(5.10) Dry Humility (30±5) & Wet Humility (85±5)

6. Protection Resistant to Fuel Oil

Test Requirement: Change in Volume and Change in Hardness (Outsole) is No More Than +12% (*)

Standards: ENISO 20344:2011(8.6.1)

7. Sole Bonding Strength Test

• EN ISO 20344:2011, 5.2 (Between Upper & Sole)
• Average Test Result 5.8±5 (N/mm)