General description
- Stereo car CD, CD audio, CD-R/RW,MP3 playback capability, Video CD, Radio FM/AM/SW
- Video CD, CD audio, CD-RW/RW, MP3 playback capability
- 52Wx4 high power amplifier
- EQ3 3-band equalizer with 7 user-ajustable presets
- 2 preamp outputs with selectable subout
- Front Aux for portable audio input
- Detachable faceplate
Audio section
- Maximum Power Output : 50 W per channel
- Continuous Power Output(RMS): 20 W per channel into 4Ω, 40 Hz to 20000 Hz at less than
- Load Impedance : 4Ω allowance
- Signal-to-Noise Ratio: 120dB
- Line-Out, Subwoofer-Out Level/Impedance : 4.8V/20 kΩ load (full scale)
- Output Impedance : ≤ 600Ω
Tuner Section
- Antenna terminal : External antenna (aerial) connector
- FM Frequency Range : 87.5 MHz to 108.0 MHz (at 50kHz step) – 87.5 MHz – 107.9 MHz (at 200 kHz)
- Usable Sensitivity : 9dBf
- Intermediate frequency: 10,7 mHz
- FM interval : 50kHz/200 kHz switchable
- Intermediate frequency : 10.7 MHz/450 kHz
- Selectivity : 75dB (stereo), 69 dB (mono)
- Frequency response : 30 – 15000 Hz
- MW Frequency Range : 531 MHz to 108.0 MHz (at 50kHz step) – 87.5 MHz – 107.9 MHz (at 200 kHz)
- Usable Sensitivity : 30µV
- Intermediate frequency: 10,7 mHz
- MW tuning interval : 9kHz/10 kHz switchable
- Intermediate frequency : 10.7 MHz/450 kHz
- Selectivity : 75dB (stereo), 69 dB (mono)
- Frequency response : 30 – 15000 Hz
- SW Tuning range: SW1 : 2940 – 7735 kHz – SW2: 9500 – 18135kHz (except for 10140 – 11575 kHz)
- Intermediate frequency : 10.7 MHz/450 kHz
- Usable Sensitivity : 30µV
CD Player Section
- Signal-to-noise ratio : 90 dB
- Frequency response : 10 – 20,000 Hz
- Wow and flutter : Below measurable limit
- Signal format system : PAL/NTSC
Power Amplifier Section
- Outputs : Speaker outputs (sure seal connectors)
- Speaker impedance : 4 – 8Ω
- Max power output : Below measurable limit
- Signal format system : 52W x 4 (at 4 ohms)
General
- Chassis dimensions (WxHxD)mm: 178x50x179mm – Mounting dimensions : 182x53x161mm
- Mass : approx.. 1.2 kg
- Supplied accessories : card remote commander : RM-X158 – Parts for installation and connections (1 set)
- Input : Parking break control terminal – Aerial input terminal – AUX input jack (stereo mini jack)
- Output : Audio (front, sub/rear switchable) – Video output terminal – Power aerial relay control terminal – Power amplifier control terminal
Eco info
- Lead-free solder is used for soldering certain parts (more than 50%)
- Halogenated flame retardants are not used in the certain printed wiring boards
- Halogenated flame retardants are not used in cabinets
- VOC (volatile organic compound) – free vegetable oil based ink is used for printing the carton
- Packaging cushions do not use polystyrene foam